John Deere 5115M

JohnDeere 5115M

5M Series Tractors

Share This Product:


  • John Deere PowerTech Diesel Engine
  • Choose from 12F/4R, 16F/16R, and 32F/16R transmission options
  • Choose climate-controlled cab, fixed open station
Manufacturer John Deere
Model 5115M (2016)
Official Test  
Nebraska Test number  Factory observed  
Manufacturer  John Deere PowerTech PWL  
Engine family  FJDXL04.5211  
Aspiration  Turbocharged / Air-to-Air Aftercooled  
Cylinders/Displacement, cu. in. (L)  4.5 L 
   4/276 cu in. 
Cylinder Liners  Wet Sleeved  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  144; 174 L 
   38; 46 gal. 
Optional  ---  
Underhood muffler  Yes  
Advertised PTO hp (kW) @ Rated rpm  74.5 @ 2100 per SAE kW 
   100 @ 2100 per SAE PTO hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  85 @ 2100 per ISO 97/68/EC kW 
   115 @ 2100 per ISO 97/68/EC engine hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  480 @ 1600  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  30 @ 1600  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Std. Transmission; Forward/Reverse  16F/16R PowrReverser  
Opt. Transmission; Forward/Reverse  32F/16R PowrReverser Plus  
Reverser  Left Hand, Electrohydraulic  
On-the-Go Shifting (Yes/No/Partial)  Partial  
Clutch; Wet/Dry  Wet  
Creeper  16F/16R PowrReverser  
Power Take-Off (PTO)  
Standard  Independent 540/540 Economy  
Optional  540/540E/1000  
PTO Speeds @ Engine rpm  540 @ 2100; 540E @ 1645 rpm 
PTO Actuation  Electrohydraulic  
Type  Open Center  
Pump Rated Output, GPM (L/min.)  ---  
Standard  24.7 gpm 
   94 L/min 
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  18.4 gpm 
   70 L/min 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  2900 psi 
   20000 kPa 
Maximum Hydraulic Power, hp (kW)  31.1 hp 
   23.2 kW 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  up to 3  
Hitch Category (SAE Designation)  2; convertible to 1  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  2550 kg 
   5600 lb 
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Lower Link  
Joystick SCV control  Optional  
Final Drive  
Type  Inboard Planetary  
Differential controls  Electrohydraulic  
Availability  ---  
Front  No  
Front & Rear  No  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged  
Brakes, Type and Control  Hydraulic Wet Disc  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  Foldable, 2-Post  
Platform - Flat/Straddle  Flat  
Gearshift Location - Console/Floor  Floor  
Cab  ---  
Doors  2  
Platform - Flat/Straddle  Flat  
dB(A) Rating  80  
Seat Suspension System  Mechanical (opt. Air Ride opt. Low Frequency heated Air Ride)  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  235 cm 
   92.5 in. 
Front Tread Range, in. (mm)  1340 - 1904 mm 
   52.8 - 75.0 in. 
Front Axle Clearance, in. (mm)  454 mm 
   17.9 in. 
Turning Radius w/Brakes, ft (m)  3.9 m 
   12.8 ft 
Turning Radius w/o Brakes, ft (m)  4.4 m 
   14.4 ft 
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  3630; 4040 kg 
   8000; 8900 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  12.4R24 R1  
Rear  18.4R30 R1  
4WD  ---  
Track widths  ---  
Country of Manufacture  Augusta, GA  
Ballasting Restrictions, lb (kg)  ---  
*Notes  Updated 8/31/2014  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.