John Deere 8345RT

8345RT

8R/8RT Series

Share This Product:

 

  • 345 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • CommandView™ III cab featuring the Generation 4 CommandCenter™
Manufacturer John Deere
Model 8345RT
Official Test  
Nebraska Test number  Nebr. OECD 1973, Summary 734  
Engine  
Manufacturer  John Deere  
Engine family  ---  
Aspiration  Variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6 cylinders/9.0 L 
   549 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  758 L 
   200 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  At 2100 per SAE: 205 kW 
   275 hp 
Official PTO hp (kW) @ Rated rpm  At 2096 rpm: 207.93 kW 
   278.85 hp 
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  At 1800 rpm: 237.77 kW 
   318.85 hp 
Advertised Engine hp (kW) @ Rated speed  At 2100 per 97/68EC PS: 254 kW 
   345 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  At 1957 rpm: 198.90 kW 
   266.73 hp 
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  At 1500 rpm: 1409 Nm 
   1039 lb-ft 
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  At 1698 rpm: 40 percent 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  ---  
Opt. Transmission; Forward/Reverse  ---  
Reverser  Right hand with IVT  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Yes, IVT  
Power Take-Off (PTO)  
Standard  45 mm 
   1.75 in. 
   20 spline, 1000 rpm 
Optional  ---  
PTO Speeds @ Engine rpm  At 2001 rpm: 1000 rpm 
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Closed-center, pressure and flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  166.6 L/min 
   44 gpm 
Optional  227.1 L/min 
   60 gpm 
Rated Flow @ One SCV, GPM (L/min.)  132 L/min 
   35 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  TBD - Nebraska Test  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2,900 psi 
Maximum Hydraulic Power, hp (kW)  TBD - Nebraska Test  
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  Four standard  
   Three or five optional  
Hitch Category (SAE Designation)  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electrohydraulic  
Joystick SCV control  ---  
Final Drive  
Type  Inboard Planetary  
Differential controls  ---  
Availability  ---  
Front  ---  
Front & Rear  ---  
Engage On-the-Go Rear Differential Lock  ---  
Axle Type  Bar  
Brakes, Type and Control  Hydraulic wet disk  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  Rigid (cab)  
Platform - Flat/Straddle  Flat  
Gearshift Location - Console/Floor  CommandArm  
Cab  ---  
Doors  One on left side  
Platform - Flat/Straddle  Flat  
dB(A) Rating  69.8 dBA 
Seat Suspension System  Air  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
4WD Dimensions  
Wheelbase, in. (mm)  2515 mm 
   99 in. 
Wheel Tread, Min. to Max. in. (mm)  Standard: 1829-3048 mm 
   72-120 in. 
   Optional: 2845-4064 mm 
   112-160 in. 
Turning Radius w/o Brakes, ft (m)  TBD  
Nebraska Test Unballasted w/Duals, lb (kg)  TBD - Nebraska Test  
Unballasted Weight, lb (kg)  Average shipping weight: 15,631 kg 
   34,460 lb 
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  ---  
Rear  ---  
4WD  ---  
Track widths  Standard: 635 mm 
   25 in. 
   Optional: 406 mm 
   16 in. 
   457 mm 
   18 in. 
   610 in. 
   24  
   762 mm 
   30 in. 
Miscellaneous  
Country of Manufacture  Waterloo, IA USA  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.