John Deere 3046R

3046R

3 Family

 

  • Powerful and reliable Yanmar Diesel Engine
  • AutoConnect™ deck compatible for deck attach/detach in seconds
  • Cab or Open Station configuration available
  • Standard hydrostatic transmission with Twin Touch™ pedals
Manufacturer John Deere
Model 3046R (2016)
Engine  
Family  EYDXL1.57HDA  
 FYDXL1.57HDA  
 GYDXL1.57HDA  
Manufacturer  Yanmar  
Engine model  3TNV86CHT-MJT  
Engine power (gross)  33.3 kW 
   45.3 hp 
Power take-off (PTO) power  27.3 kW 
   36.6 hp 
Rated engine speed  2600 rpm 
Type  Diesel  
Injection pump type  High pressure common rail direct injection  
Aspiration  Turbocharged and charge air cooled  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.57 L 
   3 / 95.7 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  86 x 90 mm 
   3.4 x 3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element with electronic restriction indicator  
Engine torque at rated speed  112 Nm 
   90 lb-ft 
Fuel tank capacity  Rollover protective structure (ROPS) - 51.1 L 
 13.5 U.S. gal. 
 Cab - 44.7 L 
 11.8 U.S. gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  75 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  High pressure common rail direct injection  
Fuel consumption  10.6 L/hr 
   2.8 gph 
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Gear 4WD / eHydro (electronic hydrostatic)  
Optional transmission; forward/reverse  ---  
Left-hand reverser  ---  
Transmission gear ranges  12F/12R PowrReverser  
   3-range, infinitely variable  
Final drive  Bull Gear  
Brakes  Multi-plate wet disc  
Steering  Hydrostatic power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  720-1450 kg 
   1587-3197 lb 
Rear  ---  
Creeper  SpeedMatch optional  
Cruise control  Standard  
Differential lock  ---  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  54.5 L/min 
   14.4 gpm 
Steering  22.3 L/min 
   5.9 gpm 
Implement  32.5 L/min 
   8.6 gpm 
Pump type  Dual gear  
Maximum operating pressure  172.4 bar 
   2500 psi 
Draft control sensing  Position control  
Remote control valves available  Up to four rear remotes  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  997.9 kg 
   2200 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm  
Optional  Mid - 2000 rpm  
Control  Position control  
Clutch  Multiple wet disc  
Brake (for mid and rear PTO)  Multiple wet disc  
Engagement method  Electro-hydraulic  
Fluid capacities  
Crankcase with filter  5.7 L 
   6 qt 
Transmission and hydraulic system  25.7 L 
   6.8 U.S. gal. 
Final drive  
Type  Bull Gear  
Differential lock  ---  
Operator station  
Rollover protective structure  Yes  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  Complies with OSHA, SAE, and CSA standards for roll-over protection  
Visibility  360 degree (angle) 
Air conditioning, temperature differential  ---  
Doors  Two  
Noise rating  80 dBA 
Seat equipment  Scissor-link  
Dimensions  
Wheelbase  172.7 cm 
   68 in. 
Front axle clearance  31 cm 
   12.2 in. 
Turning radius with brakes  2.7 m 
   8.8 ft 
Turning radius without brakes  ---  
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  ROPS - 1315.4 kg 
 2900 lb 
 Cab - 1619.3 kg 
 3570 lb 
Tires  
Front  Farm - 7-14  
 Turf (Gear 4WD) - 27x8.50-15  
 Turf (HST 4WD) - 25x10.5LLx15 
 R4 - 25x8.5-14  
Rear  Farm - 11.2-24  
 Turf - 41x14-20 or 41x18LL-16.1
  R4 - 15-19.5  
Front tread range  114 cm 
   44.9 in. 
Rear tread spacing  103.1 cm 
   40.6 in. 
Miscellaneous  
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.