John Deere 9570R Scraper Special

9570RScraperSpecial

9R/9RT/9RX Series Scraper-Special

Share This Product:

 

  • Cummins QSX15
  • New and improved e18™ PowerShift Transmission
  • New HydraCushion™ Suspension option
  • New CommandView™ III cab
Manufacturer John Deere
Model 9570R Scraper Special
Official Test  
Nebraska Test number  ---  
Engine  
Manufacturer  Cummins  
Engine family  QSX15  
Aspiration  Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  14.9 L 
   912 cu in. 
Cylinder Liners  Wet-sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  1514 L 
   400 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  ---  
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  419 kW 
   570 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  38 percent 
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™  
Opt. Transmission; Forward/Reverse  ---  
Reverser  ---  
On-the-Go Shifting (Yes/No/Partial)  ---  
Clutch; Wet/Dry  ---  
Creeper  ---  
Power Take-Off (PTO)  
Standard  ---  
Optional  ---  
PTO Speeds @ Engine rpm  ---  
PTO Actuation  ---  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  220 L/min 
   58 gpm 
Optional  435 L/min 
   115 gpm 
Rated Flow @ One SCV, GPM (L/min.)  Standard coupler: 132 L/min 
   35 gpm 
   12.7 mm 
   0.5 in. 
   Optional coupler: 159 L/min 
   42 gpm 
   19.0 mm 
   0.75 in. 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  ---  
Remote Control Valves Available  4 Standard, 6 Optional  
Hitch Category (SAE Designation)  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  ---  
Joystick SCV control  ---  
Final Drive  
Type  Inboard planetary  
Differential controls  Full-locking electrohydraulic  
Availability  ---  
Front  ---  
Front & Rear  ---  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  ---  
Brakes, Type and Control  Hydraulic power, wet disk, self adjusting on front and rear axle  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  ---  
Cab  ---  
Doors  1 left-hand  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  Standard: Air  
   Optional: Active Seat™  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
4WD Dimensions  
Wheelbase, in. (mm)  3912 mm 
   154 in. 
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  6.04 m 
   19.8 ft 
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  ---  
Rear  ---  
4WD  710/70R42 in. 173A8 R1W radial in dual configuration  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Waterloo, Iowa, USA  
Ballasting Restrictions, lb (kg)  Lesser of 24,494 kg 
   54,000 lb 
   or Tire Capacity  
*Notes  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.