2025 John Deere Q800E Series Q810E

Information

2025 John Deere Q800E Series Q810E

QuikTrak™ Stand-On Mower

19-hp (14.2-kW)

36" deck, 7-gauge fabricated deck

Mow up to 8 mph

Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation

Features may include:

  • Commercial-quality engine is reliable and provides excellent performance and life
  • Commercial-quality V-twin air-cooled engines power the QuikTrak™ Mowers:
  • FX600V 19 hp (14.2 kW) gross at 3600 rpm (Q810E)
  • FX730V 23.5 hp (17.5 kW) gross at 3600 rpm (Q820E)
  • Both engines feature:
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
  • Better fuel efficiency
  • Full-pressure lubrication with full-flow filter
  • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
  • Filtered oil reduces risk of contamination for increased engine life
  • V-twin design
  • Fast starts
  • Smooth operation
  • Vertical shaft for efficient transfer of power to the transmission and mower
  • Standard canister-type, dry replaceable, heavy-duty air cleaner
  • Q820E has dual-element air cleaner with safety element
  • Fuel pump for consistent and reliable fuel supply to the carburetor
  • Air-cooled engine design for minimum maintenance and maximum reliability
  • Standard cleanout ports for easy access to remove debris collecting in cooling fins
  • Aluminum cylinder block
  • Effectively dissipates heat
  • Lightweight and strong construction
  • Extends engine life due to elimination of debilitating engine temperatures
  • The engine is equipped with a replaceable oil filter for longer engine life.

Photos

Highlights

  • Ashmore, Illinois
  • 2025
  • John Deere
  • Q800E Series Q810E
  • Tuff Torq TZT13 IHT
  • Available
  • With chute down: 126 cm (49.5 in)
  • 117 cm (46 in) | of cut range: Increments 0.64 cm - 3.8-12.7 cm (0.25 in - 1.5-5 in)

Specifications

  • 2025
  • John Deere
  • Q800E Series
  • Q810E
  • Stand-On
  • Model: FX600V
  • Gross at 3,600 rpm: 14.2 kW (19 hp)
  • 603 cc (36.8 cu in.) | Hydraulic pump: 10 cc (0.61 cu in) | Wheel motors: 196 cc (12 cu in)
  • Electro-magnetic with brake 169 Nm (125 lb-ft) (48 in.) | Electro-magnetic with brake 271 Nm (200 lb-ft) (54 in., 60in)
  • Two, V-twin
  • Forced air, with integrated clean out ports and oil cooler
  • Heavy-duty canister type with safety element
  • Gasoline
  • Tuff Torq TZT13 IHT
  • Dual hand-controlled levers
  • Internal wet disk | Hand lever
  • 18x8.5-10 pneumatic| Caster: 11x4-5
  • Charge system: At 3,600 rpm 20A | Battery voltage: 12 V | Cold cranking amp: 300 CCA
  • Blade tip speed Approximately: 5486 m/min /(18,000 fpm) | Speed range: 0-12.9 km/h (0-8mph) | Forward Infinite: 0-12.9 km/h (0-8 mph) | Reverse Infinite: 0-5.6 km/h (0-3.5 mph)
  • Full flow, replaceable
  • Full pressure
  • Mower deck size: 91-cm (136-in) fabricated | hydraulic air cooler: Two 8.5 in. (22 cm) fans | Blade thickness: 0.64 cm (0.25 in)
  • 137-cm (54-in. ) 7Iron™ PRO side-discharge | 152-cm (60-in) 7Iron™ PRO side-discharge
  • With chute down: 126 cm (49.5 in)
  • 157.5 cm (62 in) | Foot platform up 171 cm (67.25 in) / Foot platform down 183 cm (72 in)
  • 117 cm (46 in) | of cut range: Increments 0.64 cm - 3.8-12.7 cm (0.25 in - 1.5-5 in)
  • 7 gauge: 4.6 mm (0.180 in)
  • 21.2 L (5.6 U.S. gal)
  • 4.7 L (5 U.S qt)
  • Speed and direction control Twin hand-controlled levers
  • 327 kg (720 lb)
  • 36 months or 1500 hours, whichever comes first. First 24 months, no hour limitation.