AHW, LLC

  • 515 W Ashmore Street
  • Ashmore, IL 61912
  • Call Us: 1 (877) 249-7327
  • 9530 Revere Rd
  • Clinton, IL 61727
  • Call Us: (217) 935-8558
  • 2981 Industrial Blvd
  • Crawfordsville, IL 47933
  • Call Us: (217) 935-8558
  • 27688 East 3200 North Road
  • Dwight, IL 60420
  • Call Us: (815) 584-2074
  • 559 South Main Street
  • Elburn, IL 60119
  • Call Us: (630) 365-6020
  • 1111 S. Dixie Highway
  • Hoopeston, IL 60942
  • Call Us: (217) 283-5511
  • 200 S. Spruce Street
  • Manteno, IL 60950
  • Call Us: (815) 468-1745
  • 1190 E 1200N Rd
  • Melvin, IL 60952
  • Call Us: (217) 388-7717
  • 600 West Bridge Street
  • Monticello, IL 61856
  • Call Us: (217) 762-2534
  • 926 E. McDonald Bldg. #2
  • Mount Pulaski, IL 62548
  • Call Us: (217) 792-5086
  • 150 State Route 10 East
  • New Holland, IL 62671
  • Call Us: (217) 445-2212
  • 420 N Lincoln Rd PO Box 279
  • Rockville, IL 47872
  • Call Us: (765) 569-3195
  • 705 W. Market Street
  • Somonauk, IL 60552
  • Call Us: (815) 498-2371
  • 314 N Cottonwood Rd
  • Urbana, IL 61802
  • Call Us: (217) 328-2820
  • 1753 North State Route 1
  • Watseka, IL 60970
  • Call Us: (815) 432-5441
  • 537 State Rd 28 E
  • Williamsport, IL 47993
  • Call Us: (765) 762-3650

https://www.ahwllc.com/

Print This Page

2025 John Deere 1585 TerrainCut™ 60 in. 7-Iron™ PRO side discharge

Information

2025 John Deere 1585 TerrainCut™ 60 in. 7-Iron™ PRO side discharge

TerrainCut™ Front Mower

7-Iron™ PRO Side Discharge or Fastback™ Rear Discharge Deck

Integrated ComfortCab

Diesel Engine

Compatible with select front blade, snow blower and broom attachments

Features may include:

  • Diesel engine has high-quality features to minimize operating cost
  • The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
  • These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
  • The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20. The 1550 model requires an optional kit to be compatible with B20 biodiesel fuel.
  • Key features of the engine include:
  • Economical cast-in block cylinder design for good cooling and long life
  • Indirect fuel injection (1550)
  • Direct fuel injection (1570, 1575, 1580, 1585)
  • Injects fuel directly on top of pistons for more efficient combustion
  • Delivers more horsepower per gallon of fuel
  • Improves starting
  • Develops more horsepower per gallon of fuel and improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C) (optional engine coolant heater attachment assists starting under more extreme conditions)
  • Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Enclosed engine compartment to keep out debris and lower sound levels
  • Sealed radiator compartment to keep trash and debris on outside of hood
  • Excellent torque for plenty of lugging power when operating in tough mowing conditions
  • Full-pressure lubrication for positive lubrication, even when operating on slopes
  • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
  • 90 percent to 95 percent of dirt ejected before it reaches the paper element
  • Secondary safety element for additional filtering
  • Progressive-type air restriction indicator to let operator know when the filter needs servicing

Photos

Highlights

  • Ashmore, Illinois
  • 2025
  • John Deere
  • 1585 TerrainCut™ 60 in. 7-Iron™ PRO side discharge
  • Hydrostatic full time 4WD, on-demand
  • Available
  • Cutting: 2.54-15.24 cm (1-6 in)

Specifications

  • 2025
  • John Deere
  • 1585 TerrainCut™
  • 60 in. 7-Iron™ PRO side discharge
  • Riding
  • 3TNV88C
  • Gross: 27.5 kW (37.4 hp )
  • 3
  • 3,000 rpm
  • 1.64 L (100.2 cu in)
  • At 1,950 rpm: 109 Nm (80.4 lb-ft )
  • Diesel (B20 compatible)
  • Liquid
  • Dual element dry type
  • Hydrostatic full time 4WD, on-demand
  • Drive wheels: 26x12-12 | Caster: Flat free, 11x4-5
  • Baterry: 12 V
  • 95 amp
  • Blade tip: 18,000 fpm 5,486 m/min | range: 0-24 km/h (0-15 mph)
  • 23.8 L/min ( 6.3 U.S. gpm)
  • Mower deck Size: 152 cm (60 in)
  • 17.8 cm (7 in. )
  • 7 gauge: 4.6 mm (0.180 in)
  • 125 cm (49.2 in. )
  • 147 cm (58 in)
  • with ROPS: 216 cm (85.2 in)
  • Less mower deck: 220.2 cm (86.7 in)
  • Cutting: 2.54-15.24 cm (1-6 in)
  • Tank: 60.6 L (16 U.S. gal)
  • 9.5 L (10 U.S. qt )
  • 1,176 kg (2,593 lb)
  • Spool valve: Front lift, standard | Lift cylinders: Two | Type: Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
  • One-piece stamped steel; 7-Iron PRO
  • 24 months