2025 John Deere Small Square Balers 328

Information

2025 John Deere Small Square Balers 328

Small Square Baler

Full-width feeding pickup

Adjustable hay compressor

Deep-flighted auger feeding

Accurate knotters

Features may include:

Full-width feeding pickup
  • The pickup teeth and narrow, flanged strippers extend to the flare on both sides of the pickup. This enables full, usable pickup width for feeding wide windrows.
  • Closely-spaced pickup teeth gather all of the hay in wide, heavy windrows.
  • Narrow-channel strippers positioned closely together help preserve leaves and short material to add more quality to the bale.
Adjustable hay compressor
  • The adjustable hay compressor mounts to and floats with the pickup and helps to maintain the same relationship to the pickup teeth at all operating heights.
  • The hay compressor also controls hay for continuous positive delivery to the auger.
  • The hay compressor is adjustable to nine positions to maintain positive control of hay in either large and heavy or light and fluffy windrows.
Deep-flighted auger feeding
  • Adds to the overall capacity
  • Produces higher-quality hay
  • Allows minimal crop contact with pickup teeth, which minimizes leaf loss

Photos

Highlights

  • Ashmore, Illinois
  • 2025
  • John Deere
  • Small Square Balers 328
  • Available
  • Bale size: 46 cm (18 cm) | 274.3 cm (108 in.)
  • Bale size: 36 cm (14 in) | 170.2 cm (67 in.)

Specifications

  • 2025
  • John Deere
  • Small Square Balers
  • 328
  • Square Baler
  • Minimum: 26 kW (35 PTO hp) | 540 rpm
  • Pickup: Belt slip | Needles: Shear bolt/plunger head stop | Knotters: Shear bolt
  • Equal angle 3 joint category 4
  • Pickup: Belt | Plunger: Gear and shaft | Knotters: Gear and shaft | Feeder forks: Gear and shaft
  • RH: 26x12.0-12, 4 ply | LH: 11L-14, 6 ply | Pickup Gauge Wheels Tires Size: 16.5x6.50-8
  • Plunger - Strokes/minute: 80 spm
  • Pickup diameter: 49.5 cm (19.5 in.)
  • 41 cm (16 in.)
  • Bale size: 36 cm (14 in) | 170.2 cm (67 in.)
  • Bale size: 30.5 to 127 cm (12 to 50 in.) | Auger: 154.9 cm (61 in.) | w/ long tongue: 576.5 cm (227 in.)
  • 187.9 cm (74 in.)
  • Bale size: 46 cm (18 cm) | 274.3 cm (108 in.)
  • Tooth bars/teeth: 4 bars, 104 teeth | No. of knotters: 2 | Adjustable Bale Density: Mechanical crank | Lift Control: Crank
  • Empty: 1208 kg (2685 lb)
  • Twine type: Plastic or sisal