commercial lawn turf banner

John Deere Z970R

z970r 1

ZTrak Z900 R Series

Share This Product:

 

  • 7-Iron™ PRO Mowing Deck
  • Brake-N-Go starting
  • Cross-porting hydraulic transmission
Manufacturer John Deere
Model Z970R (2017)
Engine  
Manufacturer  ---  
Model no.  FX1000V  
Horsepower (gross)  At 3600 rpm, 35 hp 
   26.1 kW 
Displacement  61 cu in. 
   999 cc 
Cylinders  Two  
Crankcase capacity  With filter, 2 U.S. qt 
   1.9 L 
Oil filter  Full flow, replaceable  
Lubrication  Full pressure  
Cooling  Air  
Air cleaner  Heavy-duty canister type with safety element  
Pre-cleaner  Yes  
Fuel system  
Fuel type  Gasoline  
Fuel consumption  Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 
   4.2-7.2 L/hr 
Fuel tank capacity  11.5 U.S. gal. 
   43.5 L 
Fuel tank switch/shut-off valve  Yes  
Electrical system  
Charge system  20 amp 
Battery voltage  12 V 
Cold cranking amp  300 amp 
Hour meter  Standard, digital  
Operator presence starting system  Brake-N-Go (foot)  
Drivetrain  
Wheel motors  Tuff Torq heavy-duty integrated piston wheel motor  
Travel speed    
Forward  0-12 mph 
   0-19.3 km/h 
Reverse  0-4.5 mph 
   0-7.2 km/h 
Speed and direction control  Twin levers  
Hydraulic capacity  5.9 U.S. qt 
   5.6 L 
Hydraulic oil cooler  ---  
Filter  Internal, replaceable  
Hydraulic pumps    
Tires  
Drive tires  24x12-12  
Rear tires  ---  
Load rating  4 PR  
Brakes  
Dynamic braking  Twin levers  
Park brake  Internal wet disk integrated in the transmission  
Park brake actuation  Foot brake  
PTO  
Type  Electro-magnetic 225 lb-ft 
   305 Nm 
Drive  V-belt  
Mower decks  
Available widths  60, 72 in. 
   152, 183 cm 
Deck construction  7-Iron PRO, one-piece stamped steel w/reinforcements  
Deck thickness  7 gauge 
   0.179 in. 
   4.6 mm 
Discharge  Side, MOD  
Height-of-cut range  1-5.5 in. 
   2.54-14 cm 
Increments  0.25 in. 
   0.64 cm 
Cutting width  60, 72 in. 
   152, 183 cm 
Blades  
Length  Varies by deck size  
Thickness  0.25 in. 
   0.64 cm 
Tip speed  Approximately 18,000 fpm 
   5,486 m/min 
Number  Three  
Wheels  
Caster wheel type  Flat free  
Caster wheel size  13x6.5-6  
Front anti-scalp rollers  RH, center, LH  
Rear anti-scalp rollers  Optional  
Dimensions  
Length  84 in. 
   213 cm 
Width  With chute down, 74, 86 in. 
   188, 218 cm 
Height  With ROPS up, 73 in. 
   185 cm 
   With ROPS down, 47 in. 
   119 cm 
Weight  1,336 to 1,345 lb 
   606 to 610 kg 
Additional information  
Date collected  07-Nov-2016  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.