commercial lawn turf banner

John Deere Z710A 54in deck

z710a 54in 1

ZTrak 700 Series (Older)

Share This Product:

 

Go into business with a solid performer

 If you are a part-time commercial mower, take a look at the zero-turn mowers that can accommodate both your ambitions and your budget: the new ZTrak™ Z700 Series Mowers from John Deere.

With several heavy-duty, commercial grade features, the Z700 will give you the ability to tackle any kind of mowing job you may encounter.

ManufacturerJohn Deere
Model Z710A 54 in. Model Year 2012
Engine  
Manufacturer ---
Model No. CV680
Horsepower (gross) 19.7 HP @ 3600 RPM; Engine Manufacturer Certified Gross Power; Tested in accordance with SAE J1995 674cc
Displacement 674 cc
Cylinders Two
Crankcase Capacity 2.0 U.S. qt
  1.89 L
Oil Filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air Cleaner Heavy-duty dual stage
Pre-Cleaner Yes
Fuel System  
Fuel Type Gas
Fuel Consumption 1.1 to 1.5 U.S. gal./hr under normal conditions, load, operation, and dependent on horsepower
Fuel Tank Capacity 7 U.S. gal.
  26.5 L
Fuel Tank Switch/Shut Off Valve Yes
Electrical System  
Charge System 15 amp
Battery Voltage 12 V
Cold Cranking Amp 340 CCA
Hour Meter Standard, digital
Operator Presence Starting System Engage brake and turn key (Brake and Go)
Drive Train  
Hydraulic Pumps Tuff Torq heavy-duty integrated piston pump
Wheel Motors Tuff Torq heavy-duty integrated piston wheel motor
Travel Speed ---
Forward 0 to 10 mph
Reverse 0 to 4.5 mph
Speed and Direction Control Twin levers
Hydraulic Capacity 2.95 U.S. qt per side
Hydraulic Oil Cooler ---
Filter Internal, replaceable
Tires  
Drive Tires 22x11-10 Turf
Rear Tires ---
Load Rating 4PR
Brakes  
Dynamic Braking Twin levers
Park Brake Internal wet-disk integrated in the transmisson
Park Brake Actuation Foot actuated pedal
PTO  
Type Electro-magnetic (125 lb-ft)
Drive V-belt
Mower Decks  
Available Widths 54 in.
Deck construction One-piece stamped steel
Deck thickness 8 gauge - 0.177 in.
Discharge Side
Height-of-Cut Range 1.5 to 5.0 in.
Increments 0.25 in.
Cutting Width 54 in.
Blades  
Length 19 in.
Thickness .25 in.
Tip Speed Approximately 18,000 fpm
Number Three
Wheels  
Caster Wheel Type Pneumatic
Caster Wheel Size 13x5-6
Front Anti-Scalp Rollers Right, center, and left
Rear Anti-Scalp Rollers Optional
Dimensions  
Length 84 in.
Width 68 in.
Height 74 in. with ROPS up; 47 in. with ROPS down
Weight 1107 lb

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.