John Deere 6130M

6130M 1

6M Series

Share This Product:

 

  • 130-hp John Deere FT4 PowerTech™ engine
  • Available in cab or open-station configuration
  • Standard 21-GPM pressure-compensated hydraulics; 30-GPM pressure-flow compensated system available
  • Choose from a range of available transmissions
Manufacturer John Deere
Model 6130M
Official Test  
Nebraska Test number  ---  
Engine  
Manufacturer  John Deere PowerTech™ PSS (B20 Diesel Compatible)  
Engine family  ---  
Aspiration  Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  4/4.5 L 
   4/276 cu in. 
Cylinder Liners  Wet sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  205 L 
   54 U.S. gal. 
Optional  ---  
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  76 @ 2100 kW 
   102 @ 2100 hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  96 @ 2100 kW 
   130 @ 2100 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  16 Speed PowrQuad Transmission 30K (OOS Only); 16 Speed PowrQuad PLUS™ Transmission 30K (Cab Only)  
Opt. Transmission; Forward/Reverse  24 Speed PowrQuad Transmission 40K (OOS Only); 24 Speed PowrQuad PLUS Transmission 40K (Cab Only); 24 Speed AutoQuad PLUS Transmission 40K (Cab Only)  
Reverser  Left-hand base  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Yes  
Power Take-Off (PTO)  
Standard  Independent 1-3/8 in., 540/1000 reversible shaft  
Optional  Independent 540 rpm  
PTO Speeds @ Engine rpm  ---  
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Pressure Compensated (PC) System with Load Sensing Function - Base  
   Pressure & Flow Compensated (PFC) System with Load Sensing Function - Option  
Pump Rated Output, GPM (L/min.)  ---  
Standard  80 Advertised - Base (PC) L/min 
   21.1 Advertised - Base (PC) gpm 
Optional  114 Advertised - Option (PFC) L/min 
   30 Advertised - Option (PFC) gpm 
Rated Flow @ One SCV, GPM (L/min.)  ---  
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical  
Hitch Category (SAE Designation)  Category 2/3N  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  2937 Advertised kg 
   6474 Advertised lb 
Optional  3836 Advertised kg 
   8456 Advertised lb 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electronic lower link  
Joystick SCV control  Mechanical  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged axle, 8 position adjustable steel wheels - Base, Options: Flanged axle, 2 position fixed steel wheels  
   79.45 x 2555 with 2-Position Fixed Cast Wheels mm 
   3.1 x 100.6 with 2-Position Fixed Cast Wheels in. 
   79.45 x 2555 with 2-Position Fixed Steel Wheels mm 
   3.1 x 100.6 with 2-Position Fixed Steel Wheels in. 
Brakes, Type and Control  Hydraulic wet disk  
Operator Station  
Rollover Protective Structure, OOS  Yes  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  Transmission specific  
Cab  ---  
Doors  ---  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  ---  
2WD Dimensions  
Wheelbase, in. (mm)  2580 mm 
   101.6 in. 
Front Tread Range, in. (mm)  1534 to 2042 mm 
   60.4 to 80.4 in. 
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2580 mm 
   101.6 in. 
Front Tread Range, in. (mm)  1494 to 2206 mm 
   58.8 to 86.8 in. 
Front Axle Clearance, in. (mm)  607 mm 
   23.9 in. 
Turning Radius w/Brakes, ft (m)  7.1 m 
   23.5 ft 
Turning Radius w/o Brakes, ft (m)  7.1 m 
   23.5 ft 
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  5225 kg 
   11519 lb 
Approx. Ship Wgt, lb (kg) Open; Cab  5225 kg 
   11519 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  10.00-16 10PR F2 Bias - Front in. 
   460/85R38 149A8 R1W Radial - Rear in. 
Front  ---  
Rear  ---  
MFWD    
Front  380/85R28 133A8 R1W Radial in. 
Rear  460/85R38 149A8 R1W Radial in. 
4WD  ---  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Mannheim, Germany  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 02/27/2015  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.