John Deere 6105D

6105D

6D Series Utility Tractors

Share This Product:

 

  • Reliable 4.5L John Deere PowerTech™ engine
  • NEW 12F/12R or 24F/12R PowrReverser™ transmissions
  • Cab or open station, 2WD or 4WD
Manufacturer John Deere
Model 6105D Tractor iT4
Official Test  
Nebraska Test number  Nebraska Tractor Test 2055  
Engine  
Manufacturer  John Deere 4.5L PowerTech PWX (4 valve) iT4 Engine  
Engine family  ---  
Aspiration  Wastegate Turbocharger with air to air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  4 / 4.5 L 
   4 / 275 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  158 L 
   41.7 U.S. gal. 
Optional  N/A  
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  65 kw @ 2200  
   87 hp @ 2200  
Official PTO hp (kW) @ Rated rpm  67.25 kw @ 2199  
   90.18 hp @ 2199  
@ Standard PTO @ Eng rpm  67.32 kw @ 2065  
   90.28 hp @ 2065  
Maximum @ Eng rpm  68.02 kw @ 1900  
   91.22 hp @ 1900  
Advertised Engine hp (kW) @ Rated speed  78 kW @ 2200  
   105 hp @ 2200  
Max Unballast Drwbr hp (kW) @ Eng rpm  Not Tested per NE Test 2055  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  399 nm @ 1499  
   294 lb-ft @ 1499  
Max Torque Rise (80% rtd spd) @ Eng rpm  23.0% @ 1759 rpm 
Maximum Torque Rise % (PTO) @ Eng rpm  36.1% @ 1499 rpm 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  21.67 & 3.10 @ 2199 L/hr 
   5.73 & 15.75 @ 2199 U.S. gal./hr 
Standard PTO Speed @ Eng speed  20.82 & 3.23 @ 2065 L/hr 
   5.50 & 16.42 @ 2065 U.S. gal./hr 
Maximum PTO Power @ Eng rpm  20.07 & 3.39 @ 1900 L/hr 
   5.30 & 17.21 @ 1900 U.S. gal./hr 
Maximum Engine Power @ Eng rpm  Not Tested per NE Test 2055  
Max Unballasted Drawbar Power @ Eng rpm  Not Tested per NE Test 2056  
75% Load, Full Engine rpm (Unballasted)  Not Tested per NE Test 2057  
75% Load @ Reduced rpm (Unballasted)  Not Tested per NE Test 2058  
Transmission  
Std. Transmission; Forward/Reverse  12F/12R Top Shaft Synchronized (TSS) with PowrReverser (30K)  
Opt. Transmission; Forward/Reverse  24F/24R Top Shaft Synchronized (TSS) with PowrReverser and Hi-Lo (30K)  
Reverser  Base LH  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  No  
Power Take-Off (PTO)  
Standard  Independent 540/1000  
Optional  N/A  
PTO Speeds @ Engine rpm  540 @ 2085 or 1000 @ 2066 rpm 
PTO Actuation  Electronic  
Hydraulics  
Type  Open-Center  
Pump Rated Output, GPM (L/min.)  ---  
Standard  75.7 Advertised L/min 
   20.0 Advertised gpm 
Optional  N/A  
Rated Flow @ One SCV, GPM (L/min.)  80.1 L/min 
   21.2 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  19,500 kPa 
   2828 psi 
Maximum Hydraulic Power, hp (kW)  22.8 kW 
   30.6 hp 
Hitch Draft Control Load Sense Type  Lower-link  
Remote Control Valves Available  2 std., 3 opt.  
Hitch Category (SAE Designation)  Category II  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  2500 kg Advertised with 2 x 70 mm lift cylinders  
   5500 lb Advertised with 2 x 70 mm lift cylinders  
   Nebraska Tested 25.5 kg with 2 x 70 mm lift cylinders  
   Nebraska Tested 5722 lb with 2 x 70 mm lift cylinders  
Optional  3378 kg Advertised with 2 x 80 mm lift cylinders  
   7300 lb Advertised with 2 x 80 mm lift cylinders  
   Nebraska Tested 32.5 kg with 2 x 80 mm lift cylinders  
   Nebraska Tested 7304 lb with 2 x 80 mm lift cylinders  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Mechanical  
Joystick SCV control  Mid mount, opt.  
Final Drive  
Type  Inboard Planetary  
Differential controls  Mechanical  
Availability  ---  
Front  N/A  
Front & Rear  N/A  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged  
Brakes, Type and Control  Mechanically actuated wet disk  
Operator Station  
Rollover Protective Structure, OOS  Yes  
Rigid - Foldable - Telescopic  Foldable  
Platform - Flat/Straddle  Flat  
Gearshift Location - Console/Floor  Floor  
Cab  ---  
Doors  2  
Platform - Flat/Straddle  Flat  
dB(A) Rating  75  
Seat Suspension System  Mechanical, Air opt.  
2WD Dimensions  
Wheelbase, in. (mm)  2456 mm 
   96.7 in. 
Front Tread Range, in. (mm)  1523-2033 mm 
   60.0-80.0 in. 
Rear Tread Range, in. (mm)  1512-2012 mm 
   59.5-79.2 in. 
Minimum Rear Tread Setting, in. (mm)  1523 mm 
   60.0 in. 
Front Axle Clearance, in. (mm)  597 mm 
   23.5 in. 
Turning Radius w/Brakes, ft (m)  2.1 @ 64.4 in. tread setting m 
   7 @ 64.4 in. tread setting ft 
Turning Radius w/o Brakes, ft (m)  2.9 @ 64.4 in. tread setting m 
   9.5 @ 64.4 in. tread setting ft 
Unballasted Operating Weight, lb (kg)  N/A  
Approx. Ship Wgt, lb (kg) Open; Cab  3846 ; 4436 kg 
   8480 ; 9780 lb 
MFWD Dimensions  
Wheelbase, in. (mm)  2450 mm 
   96.5 in. 
Front Tread Range, in. (mm)  1523-2033 mm 
   60.0-80.0 in. 
Front Axle Clearance, in. (mm)  457 mm 
   18 in. 
Turning Radius w/Brakes, ft (m)  N/A  
Turning Radius w/o Brakes, ft (m)  N/A  
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  N/A  
Approx. Ship Wgt, lb (kg) Open; Cab  4150 ; 4535 kg 
   9150 ; 10000 lb 
4WD Dimensions  
Wheelbase, in. (mm)  N/A  
Wheel Tread, Min. to Max. in. (mm)  N/A  
Turning Radius w/o Brakes, ft (m)  N/A  
Nebraska Test Unballasted w/Duals, lb (kg)  N/A  
Unballasted Weight, lb (kg)  N/A  
Standard Tires  
2WD  ---  
Front  10.00-16 in., 6 PR F2  
Rear  18.4-34 in., 8 PR R1  
MFWD  ---  
Front  13.6-24 in., 6 PR R1  
Rear  18.4-34 in., 8 PR R1  
4WD  N/A  
Track widths  N/A  
Miscellaneous  
Country of Manufacture  Saltillo, Mexico  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 23 MARCH 2015  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.