John Deere 6105M

6105M

6105M

Share This Product:

 

  • Low-profile design perfect for orchards, nurseries, vineyards and other hard-to-reach areas
  • Folding ROPS and rear lights
  • PowrQuadTM transmission with left hand shuttle-shift control
  • Horizontal exhaust
 
Manufacturer John Deere
Model 6105M
Official Test  
Nebraska Test number  Nebraska OECD Tractor Test 2076 - Summary 892  
Engine  
Manufacturer  John Deere 4.5L PowerTech PVX  
Engine family  ---  
Aspiration  Variable Geometry Turbocharger with Intercooler and Cooled Exhaust Gas  
Cylinders/Displacement, cu. in. (L)  4.5 L 
   4/276 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  220 L 
   58 U.S. gal. 
Optional  OOS Low Profile - 180 L 
   47.5 U.S. gal. 
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  64 @ 2100 per SAE kW 
   86 @ 2100 per SAE PTO hp 
Official PTO hp (kW) @ Rated rpm  65.49 @ 2101 per SAE kW 
   87.83 @ 2101 per SAE PTO hp 
@ Standard PTO @ Eng rpm  96.86 (72.23) @ 1962 per SAE rpm 
Maximum @ Eng rpm  99.07 (73.87) @ 1852 per SAE rpm 
Advertised Engine hp (kW) @ Rated speed  78 @ 2100 per ISO 97/68/EC kW 
   105 @ 2100 per ISO 97/68/EC hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  67.30 @ 1850 per SAE kW 
   90.25 @ 1850 per SAE hp 
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  452 @ 1401 Nm 
   333 @ 1401 lb-ft 
Max Torque Rise (80% rtd spd) @ Eng rpm  38.0% @ 1681 rpm 
Maximum Torque Rise % (PTO) @ Eng rpm  51.7% @ 1401 rpm 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  21.37 hp hr/gal. & 15.56 hp hr/gal. @ 2101  
   5.65 & 15.56 @ 2101 U.S. gal./hr 
Standard PTO Speed @ Eng speed  21.93 hp hr/gal. & 3.29 hp hr/gal. @ 1962  
   5.79 & 16.72 @ 1962 U.S. gal./hr 
Maximum PTO Power @ Eng rpm  21.99 hp hr/gal. & 3.36 hp hr/gal. @ 1852  
   5.81 & 17.05 @ 1852 U.S. gal./hr 
Maximum Engine Power @ Eng rpm  21.50 hp hr/gal. & 2.85 hp hr/gal. @ 2100  
   5.68 & 14.45 @ 2100 U.S. gal./hr 
Max Unballasted Drawbar Power @ Eng rpm  22.10 hp hr/gal. & 3.05 hp hr/gal. @ 1850  
   5.83 & 15.47 @ 1850 U.S. gal./hr 
75% Load, Full Engine rpm (Unballasted)  18.85 hp hr/gal. & 2.56 hp hr/gal. @ 2194  
   4.98 & 13.00 @ 2194 U.S. gal./hr 
75% Load @ Reduced rpm (Unballasted)  16.80 hp hr/gal. & 2.88 hp hr/gal. @ 1601  
   4.44 & 14.61 @ 1601 U.S. gal./hr 
Transmission  
Std. Transmission; Forward/Reverse  PowrQuad PLUS 40K; 24F/24R (OOS - SyncroPlus 30K; 12F/4R)  
Opt. Transmission; Forward/Reverse  PowrQuad PLUS 30K; 16F/16R -- AutoQuad PLUS 40K; 24F/24R (OOS - PowrQuad 30K; 16F/16R -- PowrQuad 40K; 24F/24R)  
Reverser  Base LH  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Yes  
Power Take-Off (PTO)  
Standard  Independent 540/1000 RPM, 1 3/8 in. 
Optional  Independent 540 RPM  
PTO Speeds @ Engine rpm  540 @ 1967 or 1000 @ 1962  
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Pressure Compensated (PC) System with Load Sensing Function  
Pump Rated Output, GPM (L/min.)  ---  
Standard  80 L/min 
   21.1 gpm 
Optional  114 L/min 
   30 gpm 
Rated Flow @ One SCV, GPM (L/min.)  83.8 L/min Std. 45 cc Pump; 115.3 L/min Opt. 60 cc Pump L/min 
   22.1 U.S. gpm Std. 45 cc Pump; 30.5 U.S. gpm Opt. 60 cc Pump gpm 
Max Output @ SCV Couplers, GPM (L/min.)  84.0 L/min Std. 45 cc Pump; 115.6 L/min Opt. 60 cc pump L/min 
   22.2 U.S. gpm Std. 45 cc Pump; 30.5 U.S. gpm Opt. 60 cc pump gpm 
Maximum Operating Pressure, psi (kPa)  20000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  25.9 Std. Pump and 33.8 Opt. Pump kW 
   34.8 Std. Pump and 45.4 Opt. Pump hp 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical  
Hitch Category (SAE Designation)  Category 3N/2  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  2131.21 - 2 x 70 mm lift cylinders per NE Test kg 
   4689 - 2 x 70 mm lift cylinders per NE Test lb 
Optional  2794.02 - 2 x 80 mm lift cylinders per NE Test kg 
   6152 - 2 x 80 mm lift cylinders per NE Test lb 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  Refer to Operator's Manual  
Optional  Refer to Operator's Manual  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  Refer to Operator's Manual  
Optional  Refer to Operator's Manual  
Sensing type  Electronic Lower Link  
Joystick SCV control  Mechanical  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flange/Rack and pinion  
Brakes, Type and Control  Hydraulic actuated oil cooled  
Operator Station  
Rollover Protective Structure, OOS  Yes  
Rigid - Foldable - Telescopic  N/A  
Platform - Flat/Straddle  Yes  
Gearshift Location - Console/Floor  Transmission specific  
Cab  ---  
Doors  2  
Platform - Flat/Straddle  N/A  
dB(A) Rating  66.6 dBA 
Seat Suspension System  Mechanical and Air Suspended  
2WD Dimensions  
Wheelbase, in. (mm)  2580 mm 
   101.6 in. 
Front Tread Range, in. (mm)  TBD  
Rear Tread Range, in. (mm)  TBD  
Minimum Rear Tread Setting, in. (mm)  TBD  
Front Axle Clearance, in. (mm)  TBD  
Turning Radius w/Brakes, ft (m)  TBD  
Turning Radius w/o Brakes, ft (m)  TBD  
Unballasted Operating Weight, lb (kg)  TBD  
Approx. Ship Wgt, lb (kg) Open; Cab  TBD  
MFWD Dimensions  
Wheelbase, in. (mm)  2580 mm 
   101.6 in. 
Front Tread Range, in. (mm)  2015 mm 
   79.3 in. 
Front Axle Clearance, in. (mm)  520 mm 
   20.47 in. 
Turning Radius w/Brakes, ft (m)  Per tire size required, utilize Turn Radius Calculator Tool located in ASM  
Turning Radius w/o Brakes, ft (m)  Per Tire Size required, utilize Turn Radius Calculator Tool located in ASM  
Limited Slip Differential  30 - 45 percent 
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  5008 kg 
   11040 lb 
4WD Dimensions  
Wheelbase, in. (mm)  N/A  
Wheel Tread, Min. to Max. in. (mm)  N/A  
Turning Radius w/o Brakes, ft (m)  N/A  
Nebraska Test Unballasted w/Duals, lb (kg)  N/A  
Unballasted Weight, lb (kg)  N/A  
Standard Tires  
2WD  ---  
Front  10.00-16 in. 10PR F2 Bias  
Rear  460/85R34 in. 147A8 R1W Radial  
MFWD  ---  
Front  380/85R24 in. 131A8 R1W Radial  
Rear  460/85R34 in. 147 A8 R1W Radial  
4WD  ---  
Track widths  N/A  
Miscellaneous  
Country of Manufacture  Mannheim, Germany  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 03/28/2014  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.