John Deere 8245R

8245R

8R/8RT Series

Share This Product:

 

  • 245 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • MFWD, or Independent Link Suspension (ILS™)
Manufacturer John Deere
Model 8245R (MY2014)
Official Test  
Nebraska Test number  TBD Nebraska Test  
Engine  
Manufacturer  John Deere  
Engine family  9.0L: EJDXL09.0301  
Aspiration  Dual turbochargers, variable geometry turbo with fixed geometry turbo in series  
Cylinders/Displacement, cu. in. (L)  6 cylinders/9.0 L 
   549 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  With G47/48 tires: 645 L 
   170.4 U.S. gal. 
   With G49 tires: 686 L 
   181.2 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  At @ 2100 per SAE: 149 PTO hp 
   200 hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  At 2100 per 97/68EC PS: 180 kW 
   245 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  16-speed PowerShift; 16/5  
Opt. Transmission; Forward/Reverse  e23; 23/11 (42 or 50) km/h 
   IVT (42 or 50) km/h 
Reverser  Left-hand or Right-hand (PowerShift RH only)  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  IVT  
Power Take-Off (PTO)  
Standard  45 mm (1.75 in.), 20 spline, 1000 rpm  
Optional  45 mm (1.75 in.), 20 spline, 1000 rpm and 1000E economy rpm, in-cab shiftable  
   45 mm (1.75 in.), 20 spline, 1000 rpm, capable of 35 mm (1.375 in.), 6/21 spline, 540/1000 rpm  
PTO Speeds @ Engine rpm  16-speed PowerShift: 1000 PTO rpm @ 2003 engine rpm, 1000 ECO PTO rpm @ 1596 engine rpm, and 540 PTO rpm @ 1817 engine rpm  
   IVT: 1000 PTO rpm @ 2000 engine rpm, 1000 ECO PTO @ 1594 engine rpm, and 540 PTO rpm @ 1814 engine rpm  
   e23: 1000 PTO rpm @ 1995 engine rpm, 1000 ECO PTO @ 1590 engine rpm, and 540 PTO rpm @ 1810 engine rpm  
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  227.1 L/min 
   60 gpm 
Optional  321 L/min 
   85 gpm 
Rated Flow @ One SCV, GPM (L/min.)  Rear: 0.5 in. 
   SCV: 132 L/min 
   35 gpm 
   Rear: 0.75 in. 
   SCV: 153 L/min 
   40.5 gpm 
   Front SCV: 96 L/min 
   25 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,400 (+ or - 300) kPa 
   2958 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Electronic  
Remote Control Valves Available  Standard: four  
   Optional: five or six  
   2 Front SCV option  
Hitch Category (SAE Designation)  Standard: Cat 3/3N  
   Optional: Cat 4N/3  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  Cat 3/3N: 6350 kg 
   14,000 lb 
Optional  Cat 3/3N: 8391 kg 
   18,500 lb 
   Cat 4N/3: 9072 kg 
   20,000 lb 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electrohydraulic  
Joystick SCV control  Electrohydraulic optional  
Final Drive  
Type  Inboard planetary  
Differential controls  Electrohydraulic  
Availability  Yes  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Bar axle, rack and pinion  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  CommandARM  
Cab  ---  
Doors  LH  
Platform - Flat/Straddle  Flat  
dB(A) Rating  ---  
Seat Suspension System  Standard: air  
   Optional: active seat  
   Optional: Cab suspension with air seat  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  MFWD/PST with 625-kg (1378-lb) inner weights, front weight support, Cat3 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R46 rear duals, 420/90R30 fronts:  
   12,680 kg; 27,953 lb  
   ILS/IVT with 625-kg (1378-lb) inner weights,front weight support, Cat4 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R50 rear duals, 420/85R34 front duals:  
   15,009 kg; 33,091 lb  
MFWD Dimensions  
Wheelbase, in. (mm)  MFWD: 3080 mm 
   121.3 in. 
   ILS: 3050 mm 
   120.1 in. 
Front Tread Range, in. (mm)  1300 MFWD: 1524-2235 mm 
   60-88 in. 
   1500 MFWD/ILS: 1524-3657 mm 
   60-144 in. 
Front Axle Clearance, in. (mm)  MFWD: 686 mm 
   27 in. 
   ILS: 590 mm 
   23.2 in. 
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  Limited slip or hydraulic lock differential available  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  MFWD/PST with: Inner weights: 625 kg 
   1378 lb 
   front weight support/Cat3 hitch with QC/Fuel 113.6 L 
   30 gal. 
   480/80R46 duals/420/90R30 fronts  
   12,498 kg 
   27,553 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  420/90R30  
Rear  480/80R46  
4WD  ---  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Waterloo, IA USA  
Ballasting Restrictions, lb (kg)  Refer to operator's manual  
*Notes  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.