John Deere 6170R

6170R

6R Series

Share This Product:

 

  • Reliable John Deere 6.8L PowerTech™ Interim Tier 4 engine
  • Standard 20 Speed AutoQuad PLUS™ transmission or available Direct Drive or Infinitely Variable Transmission
  • ComfortView™ cab for all day comfort
Manufacturer John Deere
Model 6170R iT4
Official Test  
Nebraska Test number  Nebraska OECD Tractor Test 2033 - Summary 827  
Engine  
Manufacturer  John Deere PowerTech PSX  
Engine family  ---  
Aspiration  Single variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6 / 6.8 L 
   6 / 415 cu in. 
Cylinder Liners  Wet sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  360 L 
   95 gal. 
Optional  405 L 
   107 U.S. gal. 
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  104 @ 2100 kW 
   140 @ 2100 PTO hp 
Official PTO hp (kW) @ Rated rpm  106.85 @ 2097 kW 
   143.28 @ 2097 PTO hp 
@ Standard PTO @ Eng rpm  117.19 @ 1960 per SAE kW 
   157.15 @ 1960 PTO hp 
Maximum @ Eng rpm  121.34 @ 1697 kW 
Advertised Engine hp (kW) @ Rated speed  125 kW 
   170 engine hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  116.89 @ 1700 kW 
   156.76 @ 1700 hp 
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  723 @ 1497 Nm 
   533 @ 1497 lb-ft 
Max Torque Rise (80% rtd spd) @ Eng rpm  42.0 @ 1680 percent 
Maximum Torque Rise % (PTO) @ Eng rpm  48.5 @ 1497 percent 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  33.58 & 3.18 @ 2097 U.S. gal./hr 
   8.87 & 16.15 @ 2097 gal. 
Standard PTO Speed @ Eng speed  35.03 & 3.35 @ 1960 U.S. gal./hr 
   9.25 & 16.98 @ 1960 gal. 
Maximum PTO Power @ Eng rpm  34.26 & 3.54 @ 1697 U.S. gal./hr 
   9.05 & 17.08 @ 1697 gal. 
Maximum Engine Power @ Eng rpm  34.03 & 2.98 @ 2100 U.S. gal./hr 
   8.89 & 15.11 @ 2100 gal. 
Max Unballasted Drawbar Power @ Eng rpm  34.49 & 3.38 @ 1700 U.S. gal./hr 
   9.11 & 17.13 @ 1700 gal. 
75% Load, Full Engine rpm (Unballasted)  29.22 & 2.70 @ 2180 U.S. gal./hr 
   7.72 & 13.73 @ 2180 gal. 
75% Load @ Reduced rpm (Unballasted)  25.21 & 3.15 @ 1647 U.S. gal./hr 
   6.66 & 15.99 @ 1647 gal. 
Transmission  
Std. Transmission; Forward/Reverse  20-speed AutoQuad PLUS ECO transmission 40 km/h 
   20-speed AutoQuad PLUS ECO transmission 25 mph 
Opt. Transmission; Forward/Reverse  16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission 50, John Deere Infinitely Variable Transmission (IVT) 0.050 to 42, or John Deere IVT 0.050 to 50 km/h 
   16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission 31, John Deere Infinitely Variable Transmission (IVT) 0.030 to 26, or John Deere IVT 0.030 to 31 mph 
Reverser  Left-hand base  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Included with IVT  
Power Take-Off (PTO)  
Standard  1-3/8-in. 540/1000 reversible shaft  
Optional  1-3/8-in. 540/540E/1000 reversible shaft or 1-3/8-in. 540E/1000/1000E reversible shaft  
PTO Speeds @ Engine rpm  540 @ 1950 or 1000 @ 1960  
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  155 Advertised L/min 
   41 Advertised gpm 
Optional  N/A  
Rated Flow @ One SCV, GPM (L/min.)  125.6 L/min 
   32.2 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  162.7 L/min 
   43.0 gpm 
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  47.4 kW 
   63.6 hp 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  3-450 Series Mechanical SCVs standard, 3 to 4 electrohydraulic SCVs; 2 or 4 mechanical SCVs are optional  
Hitch Category (SAE Designation)  Category 3/3N  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  50.3 - 2 x 85 mm lift cylinders kg 
   11,310 - 2 x 85 mm lift cylinders lb 
Optional  N/A  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  N/A  
Optional  N/A  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  N/A  
Optional  N/A  
Sensing type  Electronic lower link  
Joystick SCV control  Mechanical or electronic  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Rack and pinion  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  N/A  
Rigid - Foldable - Telescopic  N/A  
Platform - Flat/Straddle  N/A  
Gearshift Location - Console/Floor  N/A  
Cab  ---  
Doors  ---  
Platform - Flat/Straddle  ---  
dB(A) Rating  74.8 dBA 
Seat Suspension System  ---  
2WD Dimensions  
Wheelbase, in. (mm)  2985 mm 
   117.51 in. 
Front Tread Range, in. (mm)  1485-2438 mm 
   58.5-96 in. 
Rear Tread Range, in. (mm)  1604-2302 mm 
   63.1-90.6 in. 
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  469 mm 
   18.5 in. 
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2800 mm 
   110.2 in. 
Front Tread Range, in. (mm)  1524 to 2235 mm 
   60 to 88 in. 
Front Axle Clearance, in. (mm)  607 mm 
   23.9 in. 
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  7030 Cab 2WD, 7801 Cab with TLS kg 
   15,500 Cab 2WD, 17,200 Cab with TLS lb 
Approx. Ship Wgt, lb (kg) Open; Cab  7030 Cab 2WD, 7801 Cab with TLS kg 
   15,500 Cab 2WD, 17,200 Cab with TLS lb 
4WD Dimensions  
Wheelbase, in. (mm)  N/A  
Wheel Tread, Min. to Max. in. (mm)  N/A  
Turning Radius w/o Brakes, ft (m)  N/A  
Nebraska Test Unballasted w/Duals, lb (kg)  N/A  
Unballasted Weight, lb (kg)  N/A  
Standard Tires  
2WD  ---  
Front  11.00-20 in. 
Rear  480/80R46  
MFWD  ---  
Front  420/90R30  
Rear  480/80R46  
4WD  N/A  
Track widths  N/A  
Miscellaneous  
Country of Manufacture  Waterloo, Iowa, United States  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 28 March 2015  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.