John Deere 4044M

JD Compact Utilty 4044M 2015

4 Family

Share This Product:

 

  • Naturally aspirated diesel engine
  • PowrReverser™ or eHydrostatic Transmission options
  • Standard 4-wheel-drive
  • Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch
Manufacturer John Deere
Model 4044M HST/PRT (2017)
Engine  
Family  EYDXL2.19NDA  
   FYDXL2.19NDA  
   GYDXL2.19NDA  
Manufacturer  Yanmar  
Engine model  4TNV88C-MJT  
Engine power (gross)  31.7 kW 
   43.1 hp 
   PS at 2600 rpm 
   SAE J1995 rated power  
Power take-off (PTO) power  25.7 kW 
   34.5 hp 
   Per SAE J1995  
Rated engine speed  2600 rpm 
Type  Diesel  
Injection pump type  ---  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  4 / 2.189 L 
   4 / 133.5 cu in. 
Number of cylinders  Four  
Cylinder liners  Cast-in-block  
Bore and stroke  88x90 mm 
   3.46x3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Liquid  
Air cleaner  Dual element  
Engine torque at rated speed  116 Nm 
   85.6 lb-ft 
Fuel tank capacity  50 L 
   13.8 U.S. gal. 
Electrical  
Battery size  770 CCA 
Alternator (12-V)  75 amp 
Starter size  2 kW 
   2.68 hp 
Fuel system  
Type  High pressure common rail direct injection  
Fuel consumption  ---  
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  12/12 PowrReverser transmission (PRT)  
Optional transmission; forward/reverse  3/3 Hydrostatic transmission (HST)  
Left-hand reverser  Yes  
Transmission gear ranges  12F/12R PRT  
   Infinitely-variable, 3 range  
Final drive  Planetary  
Brakes  Multi-plate wet disc  
Steering  Hydrostatic power steering  
Clutch, wet/dry  Wet  
Clutch disk diameter wet clutch  129 mm 
   5.08 in. 
Axle capacity  Mechanical front-wheel drive (MFWD) - 1.6 kg 
   5.96 lb 
Front  1600 kg 
   3528 lb 
Rear  2400 kg 
   5292 lb 
Creeper  ---  
Cruise control  Optional  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  60.2 L/min 
   15.9 gpm 
Steering  ---  
Implement  ---  
Pump type  High pressure common rail direct injection  
Maximum operating pressure  ---  
Draft control sensing  Position control  
Remote control valves available  Three optional  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  1135 kg 
   2500 lb 
Power take-off (PTO)  
Standard  Independent  
   540 rpm at 2600 rpm 
Optional  ---  
Control  Position  
Clutch  Wet disc  
Brake (for mid and rear PTO)  ---  
Engagement method  Electro-hydraulic  
Fluid capacities  
Crankcase with filter  5.3 L 
   1.4 qt 
Transmission and hydraulic system  44 L 
   12 gal. 
Final drive  
Type  Planetary  
Differential lock  Yes  
Operator station  
Rollover protective structure  Yes  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Dimensions  
Wheelbase  185.5 cm 
   73 in. 
Front axle clearance  39.5 cm 
   15.6 in. 
Turning radius with brakes  2.8 m 
   9.19 ft 
Turning radius without brakes  3.0 m 
   9.84 ft 
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  Open operator station (OOS) - 1710 kg 
   3770 lb 
   Cab - 2120 kg 
   4675 lb 
Tires  
Front  Farm - 8-16  
   Turf - 27x10.5-15 or 27x12LL-15  
   R4 - 10-16.5  
Rear  Farm - 13.6-28  
   Turf - 44x18-20 or 22.5LL-16.1  
   R4 - 16.9Lx24  
Front tread range  148.1 cm 
   58.3 in. 
Rear tread spacing  137.2 cm 
   54 in. 
Miscellaneous  
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.