John Deere 3032E

JD Compact Utilty 3032E 2015

3 Family

Share This Product:

 

  • Standard four-wheel drive(4WD) for maximum traction
  • Hydro transmission with Twin Touch™ pedals for ease of use
  • Horizontal exhaust and folding ROPS – new for 2015 Model Year machines
  • Category 1 3-pt hitch compatible with dozens of implements
Manufacturer John Deere
Model 3032E (2017)
Engine  
Family  EYDXL1.64NDA  
   FYDXL1.64NDA  
   GYDXL1.64NDA  
Manufacturer  Yanmar  
Engine model  3TNV88C-NJT  
Engine power (gross)  22.9 kW 
   31.1 hp 
Power take-off (PTO) power  18.6 kW 
   25 hp 
Rated engine speed  2500 rpm 
Type  ---  
Injection pump type  High pressure common rail direct injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.64 L 
   3 / 100.2 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  88 x 90 mm 
   3.46 x 3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  87 Nm 
   64.2 lb-ft 
Fuel tank capacity  23.5 L 
   6.2 U.S. gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  75 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  High pressure common rail direct injection  
Fuel consumption  ---  
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Hydrostatic transmission (HST)  
Optional transmission; forward/reverse  ---  
Left-hand reverser  ---  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  798 kg 
   1760 lb 
Rear  1197 kg 
   2640 lb 
Creeper  No  
Cruise control  Optional  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  35.2 L/min 
   9.3 gpm 
Steering  15 L/min 
   4 gpm 
Implement  20.2 L/min 
   5.3 gpm 
Pump type  Dual gear  
Maximum operating pressure  172.4 bar 
   2500 psi 
Draft control sensing  Position control  
Remote control valves available  Up to two (optional)  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  615.1 kg 
   1356 lb 
Power take-off (PTO)  
Standard  540 rpm at 2500 rpm 
Optional  ---  
Control  Independent  
Clutch  Independent  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  4.5 L 
   4.8 qt 
Transmission and hydraulic system  ---  
Final drive  
Type  Bull Gear  
Differential lock  ---  
Operator station  
Rollover protective structure  ASABE S478  
Type  Foldable  
Platform - flat/straddle  Semi-flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Dimensions  
Wheelbase  152.4 cm 
   60 in. 
Front axle clearance  33 cm 
   13 in. 
Turning radius with brakes  2.8 m 
   9.2 ft 
Turning radius without brakes  ---  
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  1007.9 kg 
   2222 lb 
Tires  
Front  Farm - 7-14  
   Turf - 27x8.5-15  
   R4 - 25x8.5-14  
Rear  Farm - 11.2-24  
   Turf - 41x14-20  
   R4 - 15-19.5  
Front tread range  ---  
Rear tread spacing  ---  
Miscellaneous  
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.