John Deere 2025R

2025R

2 Family

 

  • 25 horsepower liquid-cooled diesel engine
  • Drive-over mower decks up to 62 inches
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ and AutoHitch ™compatible
Manufacturer John Deere
Model 2025R (2016)
Engine  
Family  EYDXL1.27NS2  
 FYDXL1.27NS2  
 GYDXL1.27NS2  
Manufacturer  Yanmar  
Engine model  3TNV80F-NDJK  
Engine power (gross)  17.8 kW 
 23.9 hp 
 SAE J1995 rated power  
Power take-off (PTO) power  14.5 kW 
   18 hp 
Rated engine speed  3000 rpm 
Type  Diesel  
Injection pump type  Indirect injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.267 L 
   3 / 77.3 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  80 x 84 mm 
   3.15 x 3.31 in. 
Compression ratio  23.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  54.6 Nm 
   40.27 lb-ft 
Fuel tank capacity  23 L 
   6.1 gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.2 kW 
   1.6 hp 
Fuel system  
Type  Indirect injection  
Fuel consumption  6.1 L/hr 
   1.6 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Hydrostatic - 2 range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  880 kg 
   1940 lb 
Rear  1100 kg 
   2426 lb 
Creeper  No  
Cruise control  Standard  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  21.2 L/min 
   5.6 gpm 
Steering  8.5 L/min 
   2.2 gpm 
Implement  12.7 L/min 
   3.4 gpm 
Pump type  Gear  
Maximum operating pressure  166.9 bar 
   2421 psi 
Draft control sensing  Position control  
Remote control valves available  Two  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  522 kg 
   1150 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm 
   Mid - 2100 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  3.2 L 
   3.4 qt 
Transmission and hydraulic system  ---  
Final drive  
Type  Bull Gear  
Differential lock  Yes  
Operator station  
Rollover protective structure  OSHA, SAE, ASAE  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Dimensions  
Wheelbase  160 cm 
   63 in. 
Front axle clearance  318.4 mm 
   12.5 in. 
Turning radius with brakes  2.04 m 
   6.7 ft 
Turning radius without brakes  2.34 m 
   7.7 ft 
Limited slip differential  No  
Approximate shipping weight (open-station; cab)  753 kg 
   1660 lb 
Tires  
Front  Turf - 23x8.50-12  
   R4 - 23x8.50-12  
Rear  Turf - 31x13.5-15  
   R4 - 12-16.5  
Front tread range  95.3 cm 
   37.5 in. 
Rear tread spacing  ---  
Miscellaneous  
Toolbox  No  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.