ag equipment banner

John Deere 5100E

E Series Tractors 5100E 2015

E Series Tractors

 

  • John Deere PowerTech™ Diesel Engine with FT4 emissions compliance
  • Cab or open operator station available
  • Standard 12F/12R PowrReverser™ Transmission and MFWD
  • 540/540 Economy PTO
Manufacturer John Deere
Model 5100E (2016)
Official Test  
Nebraska Test number  Not available at this time  
Engine  
Manufacturer  John Deere PowerTech 4045  
Engine family  FJDXL04.5305  
Aspiration  Turbocharged  
Cylinders/Displacement, cu. in. (L)  4 / 4.5 L 
   4 / 276 cu in. 
Cylinder Liners  Wet sleeved  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  Open: 114 ; Cab: 114 L 
   Open: 30 ; Cab: 30 U.S. gal. 
Optional  ---  
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  63.4 @ 2400 per SAE kW 
   85 @ 2400 per SAE hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  74.6 @ 2400 per ISO 97/68/EC kW 
   100 @ 2400 per ISO 97/68/EC hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  20.3% @ 1900 RPM (80% rated speed)  
   27.2% @ 1600 RPM (peak torque)  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  12F/12R PowrReverser  
Opt. Transmission; Forward/Reverse  24F/12R PowrReverser  
Reverser  Yes  
On-the-Go Shifting (Yes/No/Partial)  Partial  
Clutch; Wet/Dry  Wet  
Creeper  Not available  
Power Take-Off (PTO)  
Standard  540/540E  
Optional  540/1000  
PTO Speeds @ Engine rpm  540 @ 2400; 540E @ 1716; 1000 @ 2400 rpm 
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Open center  
Pump Rated Output, GPM (L/min.)  ---  
Standard  85.1 L/min 
   22.5 gpm 
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  60.1 L/min 
   15.9 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  20.1 (for a single SCV) kW 
   26.9 (for a single SCV) hp 
Hitch Draft Control Load Sense Type  Mechanical  
Remote Control Valves Available  Rear SCV - Less, Dual Standard, or Triple Deluxe; Mid SCV - Less, Dual Standard, or Triple Standard (field installed)  
Hitch Category (SAE Designation)  Category 2  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  1457 kg 
   3213 lb 
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Top link  
Joystick SCV control  Optional  
Final Drive  
Type  Inboard planetary  
Differential controls  Mechanical (pedal)  
Availability  ---  
Front  No  
Front & Rear  No  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  Foldable, 2-post  
Platform - Flat/Straddle  Straddle  
Gearshift Location - Console/Floor  Floor  
Cab  ---  
Doors  1; left-hand door standard, right-hand door optional  
Platform - Flat/Straddle  Flat  
dB(A) Rating  79 dBA 
Seat Suspension System  Mechanical (standard)  
   Air (optional)  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2350 mm 
   92.5 in. 
Front Tread Range, in. (mm)  1340 - 1904 mm 
   52.8 - 75.0 in. 
Front Axle Clearance, in. (mm)  386 mm 
   15.2 in. 
Turning Radius w/Brakes, ft (m)  3.54 m 
   11.6 ft 
Turning Radius w/o Brakes, ft (m)  4.36 m 
   14.3 ft 
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  3300; 3700 kg 
   7275; 8150 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  12.4-24 R1 Bias  
Rear  18.4-30 R1 Bias  
4WD  ---  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Augusta, GA (USA)  
Ballasting Restrictions, lb (kg)  5,325 for loader work; 4400 for field work kg 
 11,725 for loader work; 9700 for field work lb 
 Max ballast for field work is limited to 4400 kg  
 5325 kg max ballast applies to H260 loader only  
*Notes  Updated 4/8/2013  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.