John Deere 9520R

9520R

9R/9RT/9RX Series

Share This Product:

 

  • John Deere PowerTech™ 13.5L PSS
  • New and improved e18™ PowerShift Transmission
  • New CommandView™ III cab
Manufacturer John Deere
Model 9520R
Official Test  
Nebraska Test number  ---  
Engine  
Manufacturer  John Deere  
Engine family  PowerTech™ PSS 13.5L  
Aspiration  Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  13.5 L 
   824 cu in. 
Cylinder Liners  Wet-sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  1514 L 
   400 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  250 kW 
   335 hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  382 kW 
   520 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  38 percent 
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™  
Opt. Transmission; Forward/Reverse  ---  
Reverser  ---  
On-the-Go Shifting (Yes/No/Partial)  ---  
Clutch; Wet/Dry  ---  
Creeper  ---  
Power Take-Off (PTO)  
Standard  ---  
Optional  45 mm 
   20-spline  
   1000 rpm 
   1.75 in. 
PTO Speeds @ Engine rpm  ---  
PTO Actuation  Electronic  
Hydraulics  
Type  Pressure and flow compensating closed-center  
Pump Rated Output, GPM (L/min.)  ---  
Standard  220 L/min 
   58 gpm 
Optional  435 L/min 
   115 gpm 
Rated Flow @ One SCV, GPM (L/min.)  Standard coupler: 132 L/min 
   35 gpm 
   12.7 mm 
   0.5 in. 
   Optional coupler: 159 L/min 
   42 gpm 
   19.0 mm 
   0.75 in. 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  4 - 6 factory, up to 8 field installed  
Hitch Category (SAE Designation)  4N/Cat. 4  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  6804 kg 
   15,000 lb 
OECD  ---  
Standard  6804 kg 
   15,000 lb 
Optional  9072 kg 
   20,000 lb 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electrohydraulic  
Joystick SCV control  ---  
Final Drive  
Type  Inboard planetary  
Differential controls  Full-locking electrohydraulic  
Availability  ---  
Front  ---  
Front & Rear  Standard  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Double reduction  
Brakes, Type and Control  Hydraulic power, wet disk, self adjusting on front and rear axle  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  ---  
Cab  ---  
Doors  1 left-hand  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  Standard: Air  
   Optional: Active Seat™  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
4WD Dimensions  
Wheelbase, in. (mm)  3912 mm 
   154 in. 
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  6.04 m 
   19.8 ft 
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  ---  
Rear  ---  
4WD  800/70R38 in. 173A8 R1W radial in dual wheel configuration  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Waterloo, Iowa, USA  
Ballasting Restrictions, lb (kg)  Lesser of 27,216 kg 
   60,000 lb 
   or Tire Capacity  
*Notes  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.