John Deere 9370R

9370R

9R/9RT/9RX Series

Share This Product:

 

  • John Deere PowerTech™ PSS 9.0L
  • New and improved e18™ PowerShift Transmission
  • New CommandView™ III cab
Manufacturer John Deere
Model 9370R
Official Test  
Nebraska Test number  ---  
Engine  
Manufacturer  John Deere  
Engine family  PowerTech™ PSS 9.0L  
Aspiration  Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  9.0 L      548 cu in. 
Cylinder Liners  Wet-sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  1173 L  310 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  250 kW    335 hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  272 kW   370 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  38 percent 
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™  
Opt. Transmission; Forward/Reverse  ---  
Reverser  No  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  ---  
Creeper  ---  
Power Take-Off (PTO)  
Standard  ---  
Optional  45 mm   1.75 in.   20-spline   1000 rpm 
PTO Speeds @ Engine rpm  ---  
PTO Actuation  Electronic  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  220 L/min    58 gpm 
Optional  435 L/min        115 gpm 
Rated Flow @ One SCV, GPM (L/min.)  Standard coupler: 132 L/min    35 gpm     12.7 mm  0.5 in. 
   Optional coupler: 159 L/min    42 gpm   19.0 mm   0.75 in.
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa     2900 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  4 - 6 factory, up to 8 field installed  
Hitch Category (SAE Designation)  4N/Cat. 3, 4N/Cat. 4  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  6804 kg   15,000 lb 
OECD  ---  
Standard  6804 kg  15,000 lb
Optional  9072 kg    20,000 lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electrohydraulic  
Joystick SCV control  ---  
Final Drive  
Type  Inboard planetary  
Differential controls  Full-locking electrohydraulic  
Availability  ---  
Front  ---  
Front & Rear  Standard  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Single reduction  
Brakes, Type and Control  Hydraulic power, wet disk, self adjusting on front and rear axle  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  ---  
Cab  ---  
Doors  One - left hand  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  Standard: Air      Optional: Active Seat™  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
4WD Dimensions  
Wheelbase, in. (mm)  3807 mm    149.9 in.
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  5.55 - Group 47 Tires m   18.2 - Group 47 Tires ft 
    5.88 - Group 48 Tires m    19.3 - Group 48 Tires ft 
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  ---  
Rear  ---  
4WD  620/70R46 in. 167A8 R1W radial in dual wheel configuration  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Waterloo, Iowa, USA  
Ballasting Restrictions, lb (kg)  Lesser of 22,105 kg   48,700 lb  or Tire Capacity  
*Notes  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.