John Deere 9570RT Scraper Special

9570RTScraperSpecial

9R/9RT/9RX Series Scraper-Special

 

  • Cummins QSX15
  • New and improved e18™ PowerShift Transmission
  • AirCushion Suspension
  • New CommandView™ III cab
Manufacturer John Deere
Model 9570RT Scraper Special
Official Test  
Nebraska Test number ---
Engine  
Manufacturer Cummins
Engine family QSX
Aspiration Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders/Displacement, cu. in. (L) 15 L
  915 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) 1324 L
  350 U.S. gal.
Standard ---
Optional ---
Underhood muffler ---
Performance  
Advertised PTO hp (kW) @ Rated rpm ---
Official PTO hp (kW) @ Rated rpm ---
@ Standard PTO @ Eng rpm ---
Maximum @ Eng rpm ---
Advertised Engine hp (kW) @ Rated speed 419 kW
  570 hp
Max Unballast Drwbr hp (kW) @ Eng rpm ---
Maximum Torque (PTO) @ rpm, lb-ft (Nm) ---
Max Torque Rise (80% rtd spd) @ Eng rpm 38 percent
Maximum Torque Rise % (PTO) @ Eng rpm ---
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm ---
Standard PTO Speed @ Eng speed ---
Maximum PTO Power @ Eng rpm ---
Maximum Engine Power @ Eng rpm ---
Max Unballasted Drawbar Power @ Eng rpm ---
75% Load, Full Engine rpm (Unballasted) ---
75% Load @ Reduced rpm (Unballasted) ---
Transmission  
Std. Transmission; Forward/Reverse e18™ 18-speed PowerShift 40 km/h
25 mph18F, 6R with Efficiency Manager™
Opt. Transmission; Forward/Reverse ---
Reverser No
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper ---
Power Take-Off (PTO)  
Standard ---
Optional ---
PTO Speeds @ Engine rpm ---
PTO Actuation ---
Hydraulics  
Type Pressure and flow compensating closed-center
Pump Rated Output, GPM (L/min.) ---
Standard 435 L/min
  115 gpm
Optional ---
Rated Flow @ One SCV, GPM (L/min.) Standard coupler: 159 L/min
42 gpm
19.05 mm
0.75 in.
Max Output @ SCV Couplers, GPM (L/min.) ---
Maximum Operating Pressure, psi (kPa) 20,000 kPa
  2900 psi
Maximum Hydraulic Power, hp (kW) ---
Hitch Draft Control Load Sense Type ---
Remote Control Valves Available Standard: four
  Optional: six
Hitch Category (SAE Designation) ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. ---
OECD ---
Standard ---
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) ---
Standard ---
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) ---
Standard ---
Optional ---
Sensing type ---
Joystick SCV control ---
Final Drive  
Type Outboard planetary
Differential controls ---
Availability ---
Front ---
Front & Rear ---
Engage On-the-Go Rear Differential Lock ---
Axle Type ---
Brakes, Type and Control Hydraulic power, wet-disk, self adjusting
Operator Station  
Rollover Protective Structure, OOS ---
Rigid - Foldable - Telescopic ---
Platform - Flat/Straddle ---
Gearshift Location - Console/Floor ---
Cab ---
Doors One-left hand
Platform - Flat/Straddle ---
dB(A) Rating ---
Seat Suspension System Air Suspension
2WD Dimensions  
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ---
MFWD Dimensions  
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Limited Slip Differential ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ---
4WD Dimensions  
Wheelbase, in. (mm) ---
Wheel Tread, Min. to Max. in. (mm) ---
Turning Radius w/o Brakes, ft (m) Zero
Nebraska Test Unballasted w/Duals, lb (kg) ---
Unballasted Weight, lb (kg) ---
Standard Tires  
2WD ---
Front ---
Rear ---
MFWD ---
Front ---
Rear ---
4WD ---
Track widths Standard: 762 mm
  30 in.
Miscellaneous  
Country of Manufacture Waterloo, Iowa, USA
Ballasting Restrictions, lb (kg) Lesser of 24,494 kg
54,000 lb
or Tire Capacity
*Notes Updated - 08/26/2014

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.