John Deere 9470RT Scraper-Special

9470RTScraperSpecial

9R/9RT/9RX Series Scraper-Special

Share This Product:

 

  • John Deere PowerTech™ 13.5L PSS
  • New and improved e18™ PowerShift Transmission
  • AirCushion Suspension System
  • New CommandView™ III cab
Manufacturer John Deere
Model 9470RT Scraper Special
Official Test  
Nebraska Test number  ---  
Engine  
Manufacturer  John Deere  
Engine family  PowerTech™ 13.5 L PSS  
Aspiration  Dual Series Turbocharger with fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  13.5 L 
   824 cu in. 
Cylinder Liners  Wet-sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  1324 L 
   350 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  ---  
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  346 kW 
   470 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  38 percent 
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™  
Opt. Transmission; Forward/Reverse  ---  
Reverser  ---  
On-the-Go Shifting (Yes/No/Partial)  ---  
Clutch; Wet/Dry  ---  
Creeper  ---  
Power Take-Off (PTO)  
Standard  ---  
Optional  ---  
PTO Speeds @ Engine rpm  ---  
PTO Actuation  ---  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  435 L/min 
   115 gpm 
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  Standard: 159 L/min 
   42 gpm 
   19.0 mm 
   0.75 in. 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  ---  
Remote Control Valves Available  4 Standard, 6 Optional  
Hitch Category (SAE Designation)  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  ---  
Joystick SCV control  ---  
Final Drive  
Type  Outboard planetary  
Differential controls  ---  
Availability  ---  
Front  ---  
Front & Rear  ---  
Engage On-the-Go Rear Differential Lock  ---  
Axle Type  ---  
Brakes, Type and Control  Hydraulic power, wet-disk, self adjusting on front and rear axle  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  ---  
Cab  ---  
Doors  1 left-hand  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  Air Suspension  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  Zero  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  ---  
Rear  ---  
4WD  ---  
Track widths  Standard: 762 mm 
   30 in. 
Miscellaneous  
Country of Manufacture  Waterloo, Iowa, USA  
Ballasting Restrictions, lb (kg)  Lesser of 24,494 kg 
   54,000 lb 
   or Tire Capacity  
*Notes  Updated - 08/26/2014  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.