John Deere 946

946MC

900 Series Mower Conditioners

Share This Product:

 

  • Modular-design cutterbar
  • Steel roll conditioners
  • Adjustable roll pressure
  • Hydraulic tongue positioning
Manufacturer John Deere
Model 946 (Center-Pivot)
Power requirements  
PTO speed  1,000 rpm 
HP 540 rpm PTO  ---  
HP 1000 rpm 1-3/8 in. PTO  75-112 kW 
   100-150 hp 
HP 1000 rpm 1-3/4 in. PTO  86-134 kW 
   115-180 hp 
Powerline type  Grob Spline  
Hydraulic pressure required  17,237 kPa 
   2,500 psi 
Cutterbar  
Type  John Deere  
Cutting width  4 m 
   13 ft 
Cutting height  1.6-11.8 cm 
   0.63-4.6 in. 
Number of disks  8  
Number of knives  16  
Disk speed  2,650 rpm 
Knife tip speed  307 km/h 
   191 mph 
Disk drive  Gear  
Lubrication  Hy-Gard Oil  
Oil reservoir capacity  8.5 L 
   9 U.S. qt 
Cutterbar oil check  Combination sight glass, drain plug  
Cutterbar angle  Adjustable  
Angle adjustment  Mechanical standard  
   Hydraulic optional  
Angle range  2-8 degree (angle) 
Cutterbar protection  Shearhub  
Adjustable gauge shoes  2 standard  
Conditioner  
Impeller  ---  
Width  269 cm 
   106 in. 
Diameter  59.4 cm 
   23.4 in. 
Number of V-tines  72  
Number of speeds  Two  
Drive  Gear  
Conditioner hood  Adjustable, single lever  
Rolls  ---  
Width  269 cm 
   106 in. 
Diameter  25.4 cm 
   10 in. 
Type of material  Urethane/steel  
Design  Recessed cleat (Urethane)  
   Intermeshing flutes (V-10 and Tri-Lobe)  
Speed  800 rpm 
Drive  Gear  
Windrow width  ---  
Tractor hookup  
Standard hitch  ---  
Ball joint equal angle hitch  ---  
Rockshaft swivel hitch  Standard  
Drawbar swivel hitch  Optional  
Dimensions  
Overall width  ---  
Transport  4 m 
   13.1 ft 
With optional trailer  3 m 
   9.7 ft 
Overall length  ---  
Conventional transport  8.2 m 
   26.9 ft 
With optional trailer  9.4 m 
   30.8 ft 
Weight  ---  
With urethane roll conditioner  3,054 kg 
   6,734 lb 
With V-10 steel roll conditioner  3,118 kg 
   6,874 lb 
With tri-lobe steel roll conditioner  3,218 kg 
   7,095 lb 
With impeller conditioner  2,955 kg 
   6,560 lb 
Standard tires  12.5L-15, 8PR  
General  
Are wrenches required for adjusting?  ---  
Float  ---  
Skid shoes  ---  
Roll pressure  ---  
Roll spacing  Yes  
Header tilt  ---  
Windrow width  ---  
Swathboard  ---  
Impeller conditioning hood  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.

Thank you for using our Scheduling assistant. Fill out the information below and we will be in touch as soon as possible to schedule your repairs.