John Deere 625D
600D Draper Platforms
The 625D Draper Platform increases combine productivity in small-grain and rice harvests.
- The draper belt system ensures smooth, uniform feeding of crop to the feed drum and the combine feederhouse.
- Ideal for harvesting crops where additional cutting platform productivity is desired.
The 625D has a true 25-ft cutting width, and the unique draper-style crop cutting system delivers the high-capacity feeding required of the high-capacity S-Series Combines.
|Type||Straight line knife drive system|
|Length, ft. (m)||25.5-ft (7.77m)|
|Knife drive||Base single; Optional Dual Knife (Combine use only); Base Dual Knife (SPW only or SPW/Combine combination use)|
|Knife speed||520 cycles/min (1040 strokes/min)|
|Cutterbar tilt||Base Hydraulic (9 degrees tilt max)|
|Number of slats||6 bat poly base; 8 bat steel optional (for forage conditions)|
|Fingers||Nylon (steel optional typically used in rice or forage conditions)|
|Diameter, in. (mm)||42-in (1067mm); 54-in (1371mm) for rice or forage conditions|
|Reel lift, in. (mm)||13.0-in (330mm) Cylinder stroke; 15.4-in (391.5 mm) Total Range|
|Reel fore and aft, in. (mm)||14.1-in (359mm) Cylinder stroke; 24.4-in (620mm) Total Range|
|Operating speeds, rpm||6-54 rpm|
|Operating speeds, rpm (54-in. reel)||5-44 rpm|
|Number of slats||---|
|Diameter, in. (mm)||---|
|Operating speeds, rpm||---|
|Width, in. (mm)||24-oz rubber coated polyester with V-Guide tracking; Side belts 40-in (1016mm); Center belts 55-in (1397mm); Center belt not included with SPW configuration|
|Clean height, in. (mm)||1-in (25.4mm)|
|Operating speed, ft./min. (m/min.)||Side belts: Variable up to 735-ft/min (223m/min); Center belts: 695-ft/min (212m/min); Center belt not included with SPW configuration|
|Speed control||Hydraulic from cab|
|Center belt reverse||Base; Center belt not included with SPW configuration|
|Diameter, in. (mm)||16-in (406mm); Feed drum not included with SPW configuration|
|Feed drum fingers||Steel heavy-duty round 5/8-in (16mm) diameter with breakaway notch and retainer|
|Number of fingers||18|
|Auger finger platform||Dual Chevron, retracting|
|Finger reach, in. (mm)||6-in (152mm)|
|Operating speed, rpm||195 rpm|
|Center clean out door||Base|
|Header Height Sensing|
|Header height sensing on the ground||Base|
|Header height sensing off the ground||---|
|Auxiliary Top Auger|
|Type||Optional; hydraulic drive|
|Platform length, ft. (m)||27.9-ft (8.49m)|
|Overall operating depth, ft. (m)||7.9-ft (2.41m)|
|Transport width, field position, ft. (m)||26.5-ft (8.09m)|
|Transport width on wheel, less dividers, ft. (m)||---|
|Transport length, hitch extended, ft. (m)||---|
|Approximate weight (slat reel), lb. (kg)||---|
|Approximate weight (pickup reel), lb. (kg)||6359 lb (2884kg) Combine Only; 5036 lb (2284kg) SPW Only|
|Approximate weight (with transport) lb (kg)||---|
|Approximate weight (optional 54-in. reel) lb (kg)||6556 lb (2974kg) Combine Only; 5234 lb (2374kg) SPW Only|
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.