John Deere 131

131FM

Front-Mount and Rear-Mount Mower-Conditioners

 

The 10-foot 2-inch rotary cutterbar can be teamed with a side-pull, center-pivot, or twin rear-mounted mower-conditioner to increase efficiency and productivity.

  • High-speed rotary disk cutterbar for cutting in tough conditions
  • Windrowing solutions to match your needs
  • Use front hitch for maximum productivity
Manufacturer John Deere
Model 131 Front-Mount Mower-Conditioner
Specifications  
PTO speed  1,000 rpm 
HP 540 rpm PTO  ---  
HP 1000 rpm 1-3/8 in. PTO  75 kW  (102 hp)
HP 1000 rpm 1-3/4 in. PTO  75 kW  (102 hp)
Powerline type  ---  
Hydraulic pressure required  ---  
Type  Rotary  
Cutting width  3.1 m (10.1 ft)
Cutting height  30-80 cm (1.2-3.2 in.)
Number of disks  8  
Number of knives  16  
Disk speed  2,986 rpm 
Knife tip speed  ---  
Disk drive  Gear  
Lubrication  GL-5 Gear Lubricant  
Oil reservoir capacity  2.25 L (0.59 U.S. gal.)
Cutterbar oil check  Fill plug  
Cutterbar angle  Adjustable  
Angle adjustment  Tractor center link  
Angle range  ---  
Cutterbar protection  Shear shaft  
Adjustable gauge shoes  ---  
Impeller  ---  
Width  264 cm (104 in.)
Diameter  ---  
Number of V-tines  54  
Number of speeds  Two  
Drive  Belt and sheaves  
Conditioner hood  Adjustable  
Rolls  ---  
Width  ---  
Diameter  ---  
Type of material  ---  
Design  ---  
Speed  ---  
Drive  ---  
Windrow width  ---  
Standard hitch  Tractor front hitch  
Ball joint equal angle hitch  ---  
Rockshaft swivel hitch  ---  
Drawbar swivel hitch  ---  
Overall width  ---  
Transport  3.1 m (10.1 ft)
With optional trailer  ---  
Overall length  ---  
Conventional transport  ---  
With optional trailer  ---  
Weight  ---  
With urethane roll conditioner  ---  
With V-10 steel roll conditioner  ---  
With tri-lobe steel roll conditioner  ---  
With impeller conditioner  1,255 kg (2,766 lb)
Standard tires  ---  
Are wrenches required for adjusting?  ---  
Float  Yes  
Skid shoes  ---  
Roll pressure  ---  
Roll spacing  ---  
Header tilt  ---  
Windrow width  ---  
Swathboard  ---  
Impeller conditioning hood  ---  

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.