John Deere 630 Flex Cutting Platform

630

600F HydraFlex Platforms

 

  • Epicyclic knife drive increases drive capacity
  • Raised-height skid shoe
  • Less reel, mounting, and drive parts
  • Easy adjustments reduce downtime

 

Manufacturer John Deere
Model 630F
Cutterbar  
Type  Knife system with in-line gearbox 102 mm (4 in.)
Cutterbar angle  10 degree (angle) 
Cutterbar length, ft. (m)  9.2 m (30 ft)
Flex cutterbar float range, in. (mm)  152 mm (6 in.)
Tilt adjustment  17 (located on feederhouse) degree (angle) 
Knife sections  Heavy-duty, over-serrated  
Guards  Forged steel, heat-treated  
Backshaft speed, rpm  490 rpm 
Knife speed, cycles/min.  520 cycles/min 
Platform auger  
Diameter, in. (mm)  660 mm (26 in.)
Operating speed, rpm  Slow down 135, 152 rpm 
   Speedup 170 rpm 
Reel  
Number for slats  6  
Diameter, in. (mm)  1,067 mm (42 in.)
Reel controls  
Height control  Hydraulic  
Speed control  Hydraulic  
Operating speeds, rpm  6-44 rpm 
Hydraulics  
Reel motor displacement (per revolution), cu. in. (L)  ---  
Reel drive system pressure, psi (kPa)  14,000 (+/- 1,000) kPa ;  2,000 (+/- 150) psi 
Reel fore/aft stroke, in. (mm)  359 mm (14.1 in.)
Dimensions  
Cutting width, ft. (m)  9.1 m (30 ft)
Gathering width, ft. (m)  9.2 m  (30.1 ft)
Overall width, ft. (m)  9.6 m  (31.7 ft)
Approximate weight, lb. (kg)  2,559 kg (5,641 lb)

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know would be interested in this information.